Our products

A variety of material pump heads are available: PVC, PTFE, stainless steel 304, stainless steel 316. Product use： * Transmission of high-viscosity media, corrosive liquids and hazardous chemicals · Petrochemical, chemical, electric power, metallurgy, mining, shipbuilding, light industry, agriculture, national defense and other industries

Product use： * Transmission of high-viscosity media, corrosive liquids and hazardous chemicals · Petrochemical, chemical, electric power, metallurgy, mining, shipbuilding, light industry, agriculture, national defense and other industries

Protection level: IP54, IP55 ·Material *Pump head material: SUS304, SUS316, PVC, PTFE ·Diaphragm material:PTFE *Check valve: SUS304, SUS316, PVC, PTFE *Valve ball: silica, SUS304, SUS316, ceramic ·Working conditions *Ambient temperature: -30℃-80℃ Flow range: 0-240L/H*Pump head material: SUS304, SUS316, PVC, PTFE*Ambient temperature: -30C-80℃ *Pressure range: 0-0.8MPA·Diaphragm material:PTFE *Motor power: 370W, 220V/380V, 50/60Hz*check valve: SUS304, SUS316, PVC, PTFE ·Drive motor: two-phase, three-phase standard motor or explosion-proof motor· valve ball: silica, SUS304, SUS316, ceramic

Media conditions Thin, clean, low viscosity liquid; PH range is 3-9； Liquid temperature -15℃~120℃; high ambient temperature: +40℃； The air-liquid volume ratio is about 1:9 (the suction volume is 8~10%)； The self-priming height is 9-NPSH(m). This product is suitable for liquid transportation, enterprise mixing and stirring, circulation and pressurization. Typical applications: air flotation treatment equipment, ozone water production equipment, oxygen-enriched water production equipment, biochemical treatment equipment, etc.; Circulating transfer of heat and refrigerant of various temperature regulating devices; various filtration devices; extraction or high-pressure transportation of gasoline, diluents, various solvents, etc. from underground storage tanks.Viscous liquids; spray treatment of clear water, pure water, food, chemical liquids, waste liquids, etc.; Harsh uses such as intermittent operation, water hammer, and sharp changes in back pressure. Such as: small steam furnaces, water supply from high-rise buildings, high-pressure water injection into high-pressure tanks, attracted by vacuum tanks; sample water is taken from rivers or water storage tanks, etc., and foamy liquids are transferred to long horizontal pipelines that are prone to gas sockets for Sino-German transportation.

UHB desulfurization slurry circulating pump is a cantilevered single-stage, single-suction centrifugal pump. Its overcurrent components are made of steel-lined ultra-high molecular weight polyethylene structure, which has strong corrosion resistance and excellent wear resistance. It can transport sulfuric acid with a concentration of less than 80%, nitric acid with a concentration of less than 50%, hydrochloric acid and other materials with various acids, alkalinity and salts, various corrosive mortars in the rare metal smelting industry, and various mixed media in the food sprinkling industry. UHB desulfurization pump scope of use 1) Phosphate sulfate fertilizer industry: transportation of dilute acid, mother liquor, sewage, seawater, fluorosilicic acid containing silica gel, phosphoric acid slurry and other media. 2) Non-ferrous metal smelting industry: especially suitable for lead, zinc, gold, silver, copper, manganese, cobalt, rare earth and other wet smelting of various acids, corrosive ore slurry, slurry (used with filter press) electrolyte, sewage and other media transportation. 3) Chemical and other enterprises: all kinds of sulfuric acid, hydrochloric acid, alkaline, oil supernatants or slurries. Titanium dioxide, iron red powder production, various dyes, pigments production, non-metallic mineral processing and other industries. 4) Chlor-alkali industry: hydrochloric acid, liquid alkali, electrolyte, etc. 5) Water treatment industry: pure water, high-purity water, sewage (leather sewage, electroplating sewage, electronic sewage, papermaking sewage, textile sewage, food sewage, domestic sewage, pharmaceutical industry sewage, etc.). 6) Steel companies: sulfuric acid and hydrochloric acid positions for pickling systems、 7) Wet desulfurization circulating pump: it can be applied to alkaline, acidic and corrosive positions at the same time. 8) Transportation of corrosive liquids and coal pastes in the coal industry and coal chemical industry; pumps are used for washing and preparing coal.

This series of pumps is suitable for conveying various neutral and corrosive liquids (acids, alkalis, salts, liquid petrochemical products, organic compounds, etc. of various concentrations and temperatures). Its temperature range is -80℃～450℃, and the high operating pressure is ZA type pump up to 2.5Mpa, ZE type pump up to 5.0MPa. This series of products is widely used in oil refineries, petrochemical industry, coal processing industry and cryogenic engineering. Chemical industry, papermaking and sugar industry and general process industry. Water supply plants, seawater desalination plants, power plants, heating and air conditioning systems, environmental protection engineering, ships and offshore industries, etc. ZE type petrochemical pump implements API610 standard, has a diameter of 25~400mm, a flow rate of up to 2600m3/h, and a head of up to 250m.

Vane pumps with high lift, small flow, and low specific rotation speed have the advantages of small size and light weight compared to volumetric pumps and multistage centrifugal pumps. The static seal replaces the dynamic seal, so that the overcurrent parts of the pump are completely sealed, and the ills of running, bubbling, and dripping that cannot be avoided by other pump mechanical seals are completely solved. It is used in chemical, pharmaceutical, petroleum and other industries. Pumping acids, lye, oils, rare and precious liquids, venom, volatile liquids, as well as circulating water equipment and filters. Especially media that are easy to leak, flammable, and explosive.

TSWA type horizontal multi-stage centrifugal pump is a horizontal, single-suction multi-stage, segmented structure, which is an energy-saving series of products. It has the advantages of high efficiency, low operating noise, good cavitation resistance, reasonable structure and long service life. It mainly transports clear water or other liquids with physical and chemical properties similar to water. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, fire-fighting pressurization, long-distance water delivery, heating, bathroom and other heating and cooling water circulation pressurization and equipment supporting, etc., especially suitable for refrigeration and air-conditioning water supply for hotels, restaurants and entertainment venues.

KCB gear pumps are suitable for conveying various oils, such as heavy oil, diesel oil, and lubricating oil. Equipped with copper gears, it can transport liquids with low flash points, such as gas, oil, benzene, etc. The stainless steel gear pump can transport beverages and corrosive liquids. It is not suitable for those containing hard particles or fibers. The applicable viscosity is 5×10^-5～1.5×103㎡/ S. The temperature is not higher than 70℃. If you need to transport high-temperature liquids, please use a high-temperature gear oil pump for a single-stage single-suction oil pump, which can transport liquids below 300℃. The pump itself has a safety valve, which plays a safety protection role when it is overloaded. The shaft seal has three types: skeleton oil seal, mechanical seal, and packing seal.

2CY series gear lubricant pumps and gear oil pumps are mainly used to transport lubricating oil in lubrication systems in various machinery and equipment. Suitable for conveying all kinds of lubricating liquids, the temperature is not higher than 70℃, if the high temperature is 200℃, contact Shanghai Sunshine pump industry to use high temperature resistant materials, the viscosity is 5×10^-5～1.5×103㎡/ S. It is not suitable for conveying corrosive, hard particles or fibers, highly volatile or low flash point liquids, such as gasoline, benzene, etc. In addition to configuring ordinary motors, explosion-proof motors of the same specifications can also be configured according to user needs.

IJ and HJ type chemical process pumps are single-stage single-suction cantilever structure. ITS MARKING, RATED PERFORMANCE points and DIMENSIONS are equivalent to the international standard ISO2858-1975(E), which is an energy-saving and replacement product that replaces the F-type corrosion-resistant centrifugal pump. Can meet the transportation of corrosive liquids with viscosities similar to water in the chemical process The temperature of the medium transported by the pump is generally -20℃ ~ 105℃. If necessary, appropriate cooling measures are used to make the temperature of the medium transported higher. The maximum working pressure of the pump is designed to be 1.6 MPa The performance range of this series of pumps (design point): flow rate is 6.3-400m3/h, head is 5-125m

WRY type series hot oil pump has been widely used in carrier heating system in China, and has entered various industrial fields such as petroleum, chemical, rubber, plastic, pharmaceutical, textile, printing and dyeing, road construction, food, etc. It is mainly used for conveying weakly corrosive high-temperature liquids without solid particles, and the use temperature is <=350℃, and it is an ideal hot oil circulation pump.

This product is widely used in: petrochemical industry, acid and alkali production, non-ferrous metal smelting, pickling process of automobile manufacturing, rare earth separation, pesticides, dyes, medicine, papermaking, electroplating, radio and other industries. Applicable temperature: -20℃～100℃. 。 It is particularly suitable for conveying flammable, explosive, toxic, volatile and precious media.

Purpose： This product is widely used in: chemical industry, acid production, alkali production, smelting, rare earths, pesticides, dyes, medicine, papermaking, electroplating, pickling, radio, foil and other industries. Applicable temperature: -20°C to 120°C. Design features： FZB series self-priming centrifugal pumps, the overcurrent parts are all made of fluoroplastic alloy. The most distinctive advantage is that it has a self-priming function, and the self-priming height can be determined within 1 to 3 meters according to the density of the medium.

AY centrifugal oil pump is mainly used in petroleum refining, petrochemical industry, chemical industry, oil fields, oil and gas transportation and other fields. 【Product features】 ◆Compact design, beautiful appearance and outstanding performance； ◆Made with advanced technology, stable quality, high efficiency and energy saving； ◆Made of stainless steel, it is corrosion-resistant, does not rust, and has a long service life.； ◆Serialized design, high interchangeability of parts, reduce user maintenance spare parts inventory； Structural features 1. It is suitable for conveying clean, low-temperature or high-temperature, neutral or corrosive liquids. 2. Flow range: 2.5～600m3/h 3. Head range: 30～330m 4. Special working conditions, professional customized services.

CZ type chemical pump applicable industry Chlor-alkali and soda ash industries; medicine, fertilizers, pesticides; petrochemical, chemical fiber, and paper industries; dye industries; environmental protection engineering and water treatment systems. CZ type chemical pump performance range Flow rate: Q 1.6-1500m3/h Head: H 5-125m Working pressure: P is less than or equal to 1.6MPa Working temperature: t -20～ +150 degrees Celsius

The maximum flow range of the pump can reach 12000m3/h, and the head of the pump is generally below 100m, which covers all pump conditions for desulfurization systems. It can be used as a large-scale slurry circulation pump for absorption towers and a limestone slurry delivery pump. Gypsum slurry discharge pump, recovery pump, pit pump, etc. PH value of slurry: 2.5-13 Chloride ion concentration: ≤60000ppm Weight concentration: ≤60% Medium temperature: ≤120℃

YW vertical submersible pump is suitable for wastewater discharge from enterprise units. Discharge system of urban sewage treatment plant. Drainage stations for subways, basements, and civil defense systems. Sewage discharge from hospitals, hotels, and high-rise buildings. A sewage drainage station in a residential area. Municipal engineering, the discharge of dilute mud from construction sites. The water supply device of the waterwater. YW vertical liquid pump farm sewage discharge and rural farmland irrigation. Supporting YW vertical submersible pump for exploration mines and water treatment equipment. Instead of carrying people on their shoulders, suck river mud. The operating conditions of YW vertical submersible pump are that the water temperature is ≤60℃, and the LIQUID pH value is 4～10.

Nominal speed 2980/1480r/min conveying medium: D-type horizontal multistage centrifugal pump is used to transport clear water without solid particles or liquids with physical and chemical properties similar to clear water. MD-type wear-resistant multistage centrifugal pump for coal mines is used to transport solid particle content (volume concentration) is not greater than 1.5% (particle size is less than0.5mm), neutral mine water or other similar sewage with a temperature not higher than 80°C DF type corrosion-resistant multistage centrifugal pump is mainly used to transport acid, alkaline ore and water or other similar weakly corrosive chemical sewage Liquid temperature: 0~80°C 3.75~1200m3/h flow range Head range! 50~1550m Type D horizontal multistage centrifugal pump is mainly used for water supply and drainage in factories, cities and mines.; MD type wear-resistant centrifugal pump for coal mines is mainly used to transport neutral ore and water and other similar sewage; DF type corrosion-resistant multi-stage centrifugal pump is mainly used for the transport of moderately corrosive media in gold treatment, mining, halogen mining, chemical industry and other occasions, and the overcurrent parts can also be used when they are made of duplex stainless steel and other materials.Transport seawater and highly corrosive media.

Flow rate: 68m3/h~28000m3/h Yang Cheng: H=6~280m Caliber: DN150-1600 Widely used in: high-rise building water supply, building fire protection, central air-conditioning water circulation, circulating water supply in engineering systems, cooling water circulation, boiler water supply, industrial water supply and drainage, water conservancy irrigation, especially suitable for water plants, paper mills, power plants, thermal power plants, steel mills, chemical plants, water conservancy projects, irrigation area water supply, etc. The use of corrosion-resistant or wear-resistant materials (such as spraying SEBF material or 1.4460 duplex stainless steel material) can transport corrosive industrial wastewater, seawater and rainwater containing suspended solids, etc.

1. Sea dial height: ≤2500 meters. 2. Ambient temperature: -25～55℃. 3. Relative humidity of the air: 9～95%. 4. Seismic intensity: 7 degrees. 5. Flow range: 50-700 (L/S). 6. Head range: 32-600m. 7. Diesel engine power: 18-1100KW. 8. Material of overcurrent parts: cast iron, ductile iron, stainless steel, cast copper. Scope of work Water supply pressure: 0.2mpa-2.5mpa (20-250 meters). Flow range: 5-1200L/S. Power: 3KW-2000KW. Speed range: 1500-3200r/min. Allowable media: drinking water, frozen water, fire-fighting water, and media that do not contain abrasive impurities or long fiber impurities, and have no chemical or mechanical corrosion to the water pump. The allowable medium temperature is 70℃ and the ambient temperature is 40℃. The allowable working pressure is 1.6mpa and the inlet pressure is 0.6mpa.

Vertical single-stage hot water pipeline centrifugal pump model significance For example: IRG50-160(I)A ISG-vertical single-stage pipeline centrifugal pump IRG-vertical single-stage hot water pipeline centrifugal pump ISG type vertical pipeline centrifugal pump is used to transport fresh water and other liquids with physical and chemical properties similar to clear water. It is suitable for industrial and urban water supply and drainage, pressurized water delivery for high-rise buildings, garden sprinkler irrigation, fire-fighting pressurization, long-distance transportation, hvac refrigeration circulation, bathroom and other heating and cooling water circulation pressurization and equipmentMatching, the use temperature T

The vertical stainless steel multistage centrifugal pump adopts a vertical segmented type with a stainless steel housing structure, so that the import and export of the pump are located on the same horizontal line and of the same caliber, and can be installed in the pipeline like a valve. The vertical stainless steel multistage centrifugal pump simultaneously concentrates the high pressure of the multistage pump and the vertical pump.The advantages of small footprint and easy installation of pipeline pumps. Because the vertical stainless steel multistage centrifugal pump adopts an excellent hydraulic model, it also has the advantages of high efficiency, energy saving and stable operation. The shaft seal of the vertical stainless steel multistage centrifugal pump adopts wear-resistant mechanical seal, no leakage and long service life.

Conditions of use of FYS type explosion-proof and corrosion-resistant submersible pump 1. Medium temperature -5℃～105℃ 2. This pump can transport highly corrosive chemical media, such as hydrochloric acid, hydrofluoric acid, boric acid, butyric acid, caustic soda, soda ash... For details, please refer to the ”Enhanced polypropylene plastic-coated liquid pump Corrosion resistance table". 3. If it is necessary to transport special media, our factory can manufacture liquid pumps made of polyvinylidene fluoride (PVDF) or F-46. A: Reinforced polypropylene. C: Polyvinylidene fluoride. D: Fluorine plastic alloy Selection range of FYS type explosion-proof and corrosion-resistant submersible pump Liquid depth: L=250---2500mm Flow rate:Ｑ=1.5M3/H---400M3/H Head: H=6m---50m Rotation speed: n=1450r/min---2900r/min Operating temperature: -5℃---105℃ The main purpose of FYS type explosion-proof and corrosion-resistant submersible pump FYS type corrosion-resistant submersible pump can transport acid, alkali, salt, oil products, beverages and other media, and is widely used in chemical industry, petrochemical industry, fine chemicals, dye chemicals, instrumentation, light industry, metallurgy, textiles, environmental protection, water treatment, medicine, food and other sectors.

Performance range Flow rate: ~7000mm3/h Head: ~25m Design working pressure P: up to 0.6MPa Working temperature: -20~+150℃ application ♦Forced circulation in the chemical process ♦Desalination of sea water ♦Urban gas engineering ♦Water treatment system In short, this series of pumps can cost-effectively transport large-flow, low-head, uniform or containing certain particles, chemically neutral, or corrosive liquids. Features ♦The pump has high efficiency and low energy consumption. ♦The energy consumption of the pump is uniform throughout the performance range, and it can be started under a closed valve without overloading the motor. ♦The overcurrent cross-section is large and not easy to clog. ♦Strong structure and long life span.

PWF type corrosion-resistant sewage pump use PWF type corrosion-resistant sewage pump can transport acidic, alkaline or other corrosive sewage with a temperature below 80℃, and is widely used in chemical, petroleum, light industry, food, pharmaceutical and environmental protection industries. PWF type corrosion-resistant sewage pump performance range Flow rate Q is 10～125m3/h； Head H is 10～18m， There are two kinds of materials for overcurrent components, ZG1Cr18Ni9 and HT200. PWF type corrosion-resistant sewage pump is a single-stage, single-suction, cantilever corrosion-resistant centrifugal sewage pump. The pump suction port is axial and horizontal, and the pump suction outlet can be installed in a horizontal and vertical direction as needed.

IH type chemical pump is a single-stage single-suction CANTILEVER centrifugal pump. ITS marked rated performance point and size are equivalent to the international standard ISO2858-1975(E). IT is an energy-saving product used to replace the F-type corrosion-resistant pump. It is suitable for chemical industry, petroleum, metallurgy, power stations, FOOD, PHARMACEUTICAL, ETC.Synthetic fibers and other materials transport corrosive media with a temperature of -20℃～105℃ or media with physical and chemical properties similar to water. Flow Q: 6.3-400m3/h Number of revolutions N: 2900-1450r/min Caliber DN: 50-200mm Head H: 5-125m With power: 0.55-90kw Working pressure P: 1.6Mpa Model significance For example: IH50-32-160 IH-international standard single-stage single-suction chemical centrifugal pump 50-Suction port diameter (mm) 32-Diameter of discharge port (mm) 160-Nominal diameter of impeller (mm)

Overview of IHF type fluorine plastic chemical pump IHF type fluorine plastic chemical pump is a single-stage single-suction fluorine plastic alloy chemical centrifugal pump, which is designed according to international standards and designed and produced in combination with the processing technology of non-metallic pumps. The pump has corrosion resistance, wear resistance, high temperature resistance, non-aging, high mechanical strength, non-toxic decomposition, and wide operating temperature.The temperature of the conveying medium is -85℃-200℃ and other advantages. IHF type fluorine plastic chemical pump product features The pump body material of IHF type fluoroplastic centrifugal pump is made of metal shell lined with poly perfluoroethylene propylene (F46), the impeller and the pump cover are all sintered and pressed with metal inserts and fluoroplastic as a whole, and the shaft seal is mechanically sealed with external bellows, and the static ring is made of 99.9% alumina ceramics or alumina ceramics.Silicon carbide, tetrafluoroethylene filling material or silicon carbide is used for the moving ring. It is characterized by the advanced and reasonable structure of the pump, strong corrosion resistance, tight and reliable sealing performance, stable operation, low noise and long service life. IHF type fluorine plastic chemical pump product use It is widely used in processes such as liquid transportation, wastewater treatment and acidification in chemical, pharmaceutical, petroleum, metallurgy, electric power, electroplating, pickling, pesticide, papermaking and other industries. This pump can transport any concentration of sulfuric acid, hydrochloric acid, nitric acid, acetic acid, hydrofluoric acid, aqua regia, strong alkali, strong oxidizing agent, organic solvent and other highly corrosive media. It is currently one of the advanced corrosion-resistant equipment.

WFB type unsealed self-control self-priming pump is a water pump mainly composed of pump body, impeller, pump cover, guide vane, auxiliary impeller, pump shaft, connecting frame, electric air control valve and other parts. It is widely used in electronics, electric power, chemical industry, metallurgy, medicine, food, electroplating, environmental protection, fire protection, municipal administration, water purification, national defense and military industry, textile printing and dyeing, mining and mineral processing industries. This type of water pump has low vibration, low noise, flexible movement, easy disassembly, assembly and maintenance, and has superior automatic control functions. It can be used with related control systems to achieve a high degree of automation. This type of water pump is widely used in thermal power plants: neutralizing water pumps, water intake pumps, mud discharge pumps, etc. Belong to this type of water pump. [1] It has various functions such as temperature resistance, pressure resistance, and wear resistance. Production of ptfe, chlorinated polyether, ultra-high molecular polyethylene, polypropylene, stainless steel, cast steel, pig iron and other materials

Overview ZA and ZAO petrochemical process pumps are designed according to AP1610 and VDMA24297 (light/medium) specifications. Scope of application This pump is suitable for conveying clean or granular liquids, low-temperature or high-temperature liquids, neutral or corrosive liquids. Main purpose Refinery, petrochemical industry, coal processing industry and cryogenic engineering; chemical industry, paper and pulp industry, sugar industry and general process industry; water supply plants, desalination plants; heating and air conditioning systems; power plants; environmental protection engineering; shipbuilding and offshore industry, etc. Model significance Example ZA40-160 ZAO40-160 ZA--Petrochemical process pump (closed impeller) ZAO--Petrochemical process pump (open impeller) 40-Pump outlet diameter (mm) 160-pump impeller nominal diameter (mm)

ZCQ type self-priming magnetic pump product overview ZCQ type self-priming magnetic pump, (hereinafter referred to as the self-priming pump) is a new product that draws on foreign new technologies on the basis of CQ type magnetic pump according to the requirements of many users, and has been successfully researched and tested by our engineers and technicians. Its performance reached the advanced level of similar foreign products in the 1990s. The pump replaces the dynamic seal with a static seal, so that the overcurrent parts of the pump are in a completely sealed state, and completely solves the ills of running, bubbling, dripping, and leaking that cannot be avoided by other pump mechanical seals. The materials of the pump body and the overcurrent parts are all made of corrosion-resistant stainless steel, steel jade ceramics, and fourMade of fluorite and other materials, it has the function of a CQ-type magnetic drive pump and integrates self-priming. It does not require a bottom valve and water diversion, and the self-priming height is 4 meters. Main features of ZCQ type self-priming magnetic pump ZCQ type magnetic self-priming pump has a compact structure, beautiful appearance, small size, low noise, reliable operation, and easy to use and maintain. It can be widely used in petroleum, chemical, pharmaceutical, electroplating, printing and dyeing, food, scientific research and other units to pump acids, alkalis, oils, rare and precious liquids, venom, volatile liquids, As well as supporting circulating water equipment, especially the pumping of leaky, flammable and explosive liquids. Therefore, it has a wide range of uses, and we sincerely recommend this product to users.

CQYB type magnetic gas-liquid mixing pump (also known as air flotation pump and dissolved air pump) is a self-priming gas-liquid mixing product installed horizontally. The QYB pump type can be used. The overcurrent parts of the pump are all made of stainless steel precision casting. Scope of application This product is suitable for liquid transportation, enterprise mixing and stirring, circulation and pressurization. Typical applications: air flotation treatment equipment, ozone water production equipment, oxygen-enriched water production equipment, biochemical treatment equipment, etc.; Circulating transfer of heat and refrigerant of various temperature regulating devices; various filtration devices; extraction or high-pressure transportation of gasoline, diluents, various solvents, etc. from underground storage tanks.Viscous liquids; spray treatment of clear water, pure water, food, chemical liquids, waste liquids, etc.; Harsh uses such as intermittent operation, water hammer, and sharp changes in back pressure. Such as: small steam furnaces, water supply from high-rise buildings, high-pressure water injection into high-pressure tanks, attracted by vacuum tanks; sample water is taken from rivers or water storage tanks, etc., and foamy liquids are transferred to long horizontal pipelines that are prone to gas sockets for Sino-German transportation. Media conditions Thin, clean, low viscosity liquid; PH range is 3-9； Liquid temperature -15℃~120℃; high ambient temperature: +40℃； The air-liquid volume ratio is about 1:9 (the suction volume is 8~10%)； The self-priming height is 9-NPSH(m). Main product features CQYB type magnetic vortex pump is a new type of vortex pump developed by our company on the basis of QYB type vortex pump. This series of pumps adopts a magnetic transmission structure and is sealed with an isolation sleeve. The pump has no mechanical sealing parts to ensure that the pump can deliver the medium without leakage. It has been proved by many users that this series of pumps not only has the characteristics of small flow and high lift of vortex pumps, but also has the advantages of magnetic pumps without leakage. Therefore, it is favored by users. The material of the overcurrent parts of the pump can be customized according to user needs, and it can transport flammable, explosive, and highly toxic chemical media without leakage.

Overview of CQB-L vertical magnetic pipeline pump Magnetic pipeline centrifugal pump is a new type of pipeline pump developed by our unit on the basis of more than ten years of experience in designing and manufacturing horizontal magnetic pumps. It not only has the characteristics of ISG pipeline centrifugal pump, but also has the advantages of magnetic chemical pump. It is a new generation of leak-free pipeline centrifugal pump. CQB-L vertical magnetic pipeline pump features 1. Perform leak-free operation, which can transport flammable, explosive, highly toxic and corrosive media； 2. The material is excellent. The overcurrent components such as the pump body, impeller, isolation sleeve, etc. are all made of high-quality stainless steel.； 3. The bushings are made of high wear-resistant silicon carbide and tungsten carbide, and the plain bearings are made of carbonite M106K, and a lubricating oil tank is set up to effectively ensure the service life of the pump.； 4. Vertical installation, compact structure and small footprint； 5. Low vibration, low noise, and particularly stable operation； 6. Most of the parts of the pump are interchangeable with the CQB series magnetic pump, and the performance of the pump is the same as that of the CQB series; the flow rate is 3.2-100m 3/h; the head is 20-80m; the power is 0.75-75kW

Overview of CQB-G high temperature magnetic drive pump CQB-G high-temperature magnetic drive centrifugal pump (referred to as high-temperature magnetic pump) is usually composed of four parts: a motor, a magnetic coupler, a water cooling device, and a corrosion-resistant centrifugal pump. Its main feature is the use of a magnetic coupler to transmit power without leakage. When the motor drives the outer magnetic steel of the magnetic coupler to rotate, the magnetic field line passes through the gap and the isolation sleeve, acting on the inner magnetic steel, causing the pump rotor to rotate synchronously with the motor, transmitting torque without mechanical contact. At the power input terminal of the pump, since the liquid is enclosed in a stationary isolation sleeve, there is no dynamic seal and no leakage. The magnetic material of the magnetic coupler adopts a high-temperature medium to maintain a strong magnetic torque. A water cooling device is installed between the motor and the magnetic coupler to prevent the heat from pumping the high-temperature medium from being transmitted to the motor. To maintain the normal operation of the motor, so as to achieve non-leakage delivery of high-temperature media. The overcurrent components of the pump can be made of corrosion-resistant materials such as 304, 304L, 302, 321, 316, 316L, UB6, CD4MCu, titanium alloy, nickel-based alloy, etc. as needed. CQB-G series magnetic pump is a new type of completely leak-free and corrosion-resistant pump jointly designed and developed across the country. Its technical and economic indicators are close to the level of similar foreign products. Its type, basic parameters and technical performance meet the standard requirements of JB/T7742-95 "Small Magnetic Drive Centrifugal pump". Main purpose and applicable environment CQB-G series magnetic pumps are suitable for petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing, water treatment, national defense and other industries. It is an ideal equipment for conveying high-temperature flammable, explosive, volatile, toxic, rare and precious liquids and various corrosive liquids. It is suitable for conveying a large series of liquids without hard particles and fibers with a working pressure of 1.6MPa, a temperature of not more than 280 degrees, a density of not more than 1840kg/m3, and a viscosity of not more than 30cm/S.

Overview of CQB-F type fluoroplastic magnetic pump CQB-F fluoroplastic magnetic pump is a new product developed by our company and introduced advanced foreign technology. It is made of polyvinylidene fluoride. This material is currently an excellent corrosion-resistant material in the world. The magnetic pump produced from this material has a wide range of uses, strong corrosion resistance and high mechanical strength.Aging, non-toxic decomposition and other advantages. Product features The design of fluoroplastic magnetic pumps not only has the advantages of compact structure, beautiful appearance, small size, low noise, reliable operation, etc. of ordinary magnetic pumps, but also its overcurrent components are all made of “plastic King” (fluoroplastic) with excellent corrosion resistance in the world, and the isolation sleeve is made of special materials., With high-strength mechanical properties, eliminates the magnetic eddy current phenomenon of ordinary magnetic pumps. Therefore, fluoroplastic magnetic pumps can transport corrosive media such as acids, alkalis, and oxidants of any concentration (strength) without damage. The leak-proof design eliminates the shaft seal and uses magnetic coupling to drive indirectly, completely eliminating the trouble of drip leakage and never polluting the site of use. Classification: At present, the main fluoroplastic magnetic pumps produced by domestic manufacturers are: CQB type fluoroplastic magnetic pump, ZMD type fluoroplastic self-priming magnetic pump, IMD type fluoroplastic magnetic drive pump, etc. Because the overcurrent part of the pump is made of “fluoroplastic alloy”. It can continuously transport corrosive media such as acids, alkalis, and strong oxidants of any concentration without damage. CQB-F fluoroplastic magnetic pump has a unique design, no mechanical shaft seal is required, and absolutely no leakage. The liquid overcurrent parts are made of fluoroplastic, ceramics, fluororubber and other materials. The outer shell of the pump body is fixed with metal materials, so the pump body is sufficient to bear the weight of the host channel, and it is convenient to use and maintain. Working principle The drive device adopts an active magnet coupling directly mounted on the motor shaft, the pump chamber is completely enclosed, and the impeller with a magnet on the pump shaft is indirectly driven by magnetic coupling. The rotating structure is compact, safe and energy-saving. Although the sturdy and durable pump body structure is in contact with the liquid part of fluoroplastic, the pump shell is a metal material, so the pump body is sufficient to withstand the weight of the pipeline and withstand mechanical shocks. The fluoroplastic magnetic pump consists of three parts: a pump, a magnetic actuator, and a motor. The key component, the magnetic actuator, consists of an external magnetic rotor, an internal magnetic rotor and a non-magnetic isolation sleeve. When the motor drives the external magnetic rotor to rotate, the magnetic field can penetrate the air gap and non-magnetic substances, and drive the internal magnetic rotor connected to the impeller to rotate synchronously, realizing non-contact transmission of power and converting the dynamic seal into a static seal. Seal. Since the pump shaft and internal magnetic rotor are completely enclosed by the pump body and isolation sleeve, the problem of “running, risking, dripping, and leaking” is completely solved, and the safety hazards of flammable, explosive, toxic, and harmful media leaking through the pump seal in the refining and chemical industry are eliminated, and the safety of employees is effectively guaranteed.Physical and mental health and safe production. Main purpose This product is widely used in: petrochemical industry, acid and alkali production, non-ferrous metal smelting, pickling process of automobile manufacturing, rare earth separation, pesticides, dyes, medicine, papermaking, electroplating, radio and other industries. Performance parameters Flow rate: 1.8-100m3/h Head: 8-32m Motor power: 0.12-18.5KW Speed: 2900r/min Operating temperature: -20℃ to 100℃. Model significance For example: CQB50-32-160F CQB-Magnetic drive centrifugal pump 50-Suction port diameter (mm) 32-Diameter of discharge port (mm) 160-Nominal diameter of impeller (mm) F-fluoroplastic

Scope of application of CQB type magnetic drive pump CQB series magnetic pumps are widely used in petroleum, chemical industry, metallurgy, pharmaceutical, electroplating, environmental protection and other industries, and can transport flammable, explosive, highly toxic and precious liquids below 100℃. Using the principle of magnetic transmission, corrosive media is transported without leakage. Flow rate: 3.2-100m3/h, head: 20-80m, power: 0.75－75KW

LW vertical sewage pump product overview LW;WL type vertical sewage pump can be moved or fixed and installed. It is used for the suction and discharge of sewage in construction, farmland drainage and irrigation, and enterprise and institution processes. In addition to conveying sewage, it is also suitable for use as a trap pump, pulp pump, irrigation and so on. Vertical sewage pumps are suitable for the discharge of severely polluted wastewater from factories, sewage discharge stations in main residential areas, urban sewage treatment plants, water distribution systems, civil defense system drainage stations, water supply equipment for waterworks, sewage discharge from hospitals and hotels, municipal engineering construction sites, mine supporting machines, rural biogasIn industries such as ponds and farmland irrigation, sewage and dirt with particles can also be used for fresh water and weakly corrosive media. The sewage pump is mainly composed of shaft, bearing frame, pump cover, impeller, pump seat, motor bracket, motor and other components. The pump is a vertical single-stage single-suction pump, and the impeller adopts a double-channel structure, which can effectively pass through fibrous substances with a diameter of 5 times the diameter of the pump and solid particles with a diameter of 50% of the diameter. Vertical sewage pump products implement the JB/T6535-92 "Technical Conditions for Centrifugal Sewage Pump" standard. Product features of LW vertical sewage pump 1. The LW sewage pump is safe and reliable, reducing maintenance costs: the balanced rotor components and reasonable bearing arrangement effectively balance the radial and axial forces of the pump, thus ensuring the long-term stable operation of the unit, with low vibration and low noise. 2. The LW sewage pump has strong overcurrent capacity: a large smooth flow channel and a special impeller anti-blocking design ensure that the pump runs efficiently and without clogging. 3. Double sealing and double protection of LW sewage pump: The two-layer machine seals are arranged in series to truly realize double protection and ensure motor safety. Working conditions of LW vertical sewage pump Flow rate: 2～1500 m 3 / h Head range: 3～45m Rated speed n: 970～2900r/min Medium temperature: -15℃～+60℃ Medium density: ≤1.3×10 3 kg/m 3 Medium pH value: 5～9 System high working pressure: ≤0.6Mpa

WQ series non-clogging fixed submersible sewage pump scope of application WQ series non-clogging mobile submersible sewage pumps are suitable for the discharge of severely polluted wastewater from factories, sewage discharge stations in main residential areas, urban sewage treatment plants, water distribution systems, civil defense system drainage stations, water supply equipment for waterworks, sewage discharge from hospitals and hotels, municipal engineering construction sites, and supporting accessories for mines.Machines, rural digesters, farmland irrigation and other industries, conveyor belt granular sewage, dirt, can also be used for fresh water and weakly corrosive media. WQ series non-clogging fixed submersible sewage pump product features 1. The double-blade impeller structure is adopted, which greatly improves the ability of dirt to pass through. 2. The mechanical seal adopts a new type of grinding sassafras pair and operates in the oil chamber for a long time.； 3. The overall structure is compact, small in size, low in noise, significant energy saving effect, easy maintenance and easy for users to replace.； 4. The automatic control cabinet can automatically control the overshoot and stop of the pump according to the required liquid level changes. No special person is required to take care of it, which is extremely convenient to use.； 5. It can be equipped with installation methods according to user needs. It provides great convenience for installation and maintenance. People do not have to enter the sewage pit for this purpose.； 6. It can be used within the design range to ensure that the motor will not be overloaded.； 7. The mechanical seal adopts a new type of hard and corrosion-resistant tungsten titanate material, which can make the pump run safely and continuously for more than 8,000 hours. Conditions of use of WQ series non-clogging fixed submersible sewage pump 1. Sewage pump series products are applicable when the rated voltage is 380V and the power frequency is 50Hz. 2. The medium temperature does not exceed 40 degrees Celsius, the medium density is ≤1150kg/m3, and the PH value is in the range of 5-9.; 3. The altitude does not exceed 1000 meters above sea level； 4. The annual viscosity of the conveying medium does not exceed 1000CP； 5. The product must be completely submerged in the water when it is working, but the diving depth shall not exceed 10m.; 6. The product material is mainly cast iron and cannot be used in highly corrosive or corrosive media.; Note: Before selecting or installing the pump, be sure to make the actual conditions of use of the pump comply with the above terms to ensure the correct use of the product!

YU-1A series portable submersible pump is improved on the basis of YU-1 type. Its overcurrent components are both molded from ultra-high molecular weight polyethylene (UHMWPE) as a whole, and also molded from reinforced polypropylene as a whole. It has excellent corrosion and wear resistance, and is suitable for use with ultra-high molecular weight polyethylene (UHMWPE) as a whole.Delivery of acidic and alkaline slurry or supernatant in the range of -20~80℃. The obvious difference between this pump and the YU-1 pump is that a coupling is added between the motor shaft and the pump shaft, which enhances the stability of the pump head operation and also provides convenience for the user's maintenance. The YU-1A-J series corrosion-resistant and wear-resistant submersible pump is equipped with a stirring paddle in the lower part of the YU-1A series submersible pump, which can transport the liquid while stirring the liquid to sink the sediment. It is suitable for the cleaning and transportation of slurry containing solid phase materials or sedimentation materials in tanks and tank containers such as sewage ponds and sedimentation tanks. This series of pumps has been mass-produced for more than ten years and has been used by more than 3,000 users and more than 8,000 positions. Its temperature resistance, corrosion resistance, mechanical stability, wear resistance and operating cost economy have all been recognized by users. Therefore, this product is a stable performance, mature technology, and popular with users., Stereotyped anticorrosive pump products, which are called ”old talents” by old users. This series of pumps can be widely used in the following industries： (1) Non-ferrous metal wet smelting industry: it is particularly suitable for the transportation of various acids, lye, corrosive ore slurries, electrolytes, waste acids, sewage and other media in wet smelting of lead, zinc, gold, silver, copper, manganese, cobalt, rare earths, etc. (2) Phosphate sulfate fertilizer industry: transportation of dilute acid, mother liquor, fluorosilicic acid containing silica gel, phosphoric acid slurry and other media. (3) Water treatment and environmental protection industry: it can transport various types of sewage with impurities. (4) Pesticides, dyes, and fine chemical industries: it can transport supernatants or pastes containing dilute acids, alkaline liquids, and mixed acids. (5) The suction of corrosive and non-corrosive supernatants or slurries in other industrial production.

Pneumatic diaphragm pump overview QBY series pneumatic diaphragm pump is a new type of conveying machinery, which is currently a novel type of pump in China. Using air compressor compressed air as the power source, all kinds of corrosive liquids, liquids with particles, high-viscosity, volatile, flammable, and highly toxic liquids can be sucked out. Its performance parameters are similar to those of WLLDENPVMPS in Federal Germany and MARIOWPUMPS in the United States. Our factory has formed a series of production, with a total of eight specifications and diameters: 10mm (3/8"),￠15mm (1/2"),￠25mm (1"),￠40mm (1 1/2"),￠50mm (2"),￠65mm (2 1/2"),￠80mm(3"),￠100mm (4"). Three materials, aluminum alloy, cast iron, and stainless steel. Diaphragm pumps use nitrile rubber, neoprene rubber, fluorine rubber, and polytetrafluoroethylene according to different liquid media. To meet the needs of different users. Since it was put into operation, the pump has been adopted by more than a thousand domestic petroleum, chemical, electronics, ceramics, textiles, paints, and pharmaceutical machinery system units. It is placed in a special occasion and is used to pump various media that cannot be sucked by conventional pumps, and it is an ideal product to replace gear pumps.Satisfactory results. Main features of pneumatic diaphragm pump 1. No need for irrigation and diversion, with a suction range of up to 7m, a head of up to 50m, and an outlet pressure of ≥6kgf/cm2; 2. The flow is spacious and the passing performance is good, allowing the passing of large particles with a diameter of up to 10mm. When pumping mud and impurities, there is little wear on the pump; 3. The head and flow rate can be stepless adjusted by the opening of the valve (the air pressure is adjusted between 1-7kgf/cm2); 4. The pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts and working medium of the pump, and the transported medium will not leak outwards. Therefore, when pumping toxic, flammable or corrosive media, it will not cause environmental pollution and endanger personal safety.; 5. There is no need to use electricity, and it is safe and reliable to use in flammable and explosive places.; 6. Can be immersed in the medium to work; 7. Convenient function, reliable work, and simple opening and stopping of the gas valve. Even if the pump is running without medium for a long time or suddenly shut down due to unexpected circumstances, the pump will not be damaged as a result. If it is not overloaded, the pump will automatically stop and have self-protection properties. When the load returns to normal, the pump will not be damaged.After that, it automatically starts and runs again; 8. The structure is simple and there are few wearing parts. The pump structure is simple to install and easy to maintain. The medium transported by the pump will not come into contact with the air distribution valve, coupling rod and other moving parts. Unlike other types of pumps, the performance is gradually degraded due to the wear of rotors, pistons, gears, blades and other components.; 9. It can transport viscous liquids (viscosity below 10,000 CPS).; 10. This pump does not need to be lubricated with oil. Even if it is idling, it has no effect on the pump. This is a major feature of this pump. The main purpose of pneumatic diaphragm pump 1. Pump peanut butter, kimchi, mashed potatoes, small red sausages, jam, apple juice, chocolate, etc. 2. Pump to absorb paint, gum, and pigments. 3. All types of adhesives and glues can be drawn by pumps. 4. All kinds of tiles, porcelain, bricks and pottery glazes. 5. After the oil well is drilled, use a pump to absorb the sediments and grouting. 6. Pump various emulsions and fillers. 7. Pump all kinds of sewage. 8. The pump is used as a tanker, and the barge clears the warehouse to absorb the sewage in the warehouse. 9. Hops and baking powder, pulp, syrup, and sugar density. 10. Pump and suck stagnant water from mines, tunnels, tunnels, mineral processing, and slag. The pump absorbs mud grouting and mortar. 11. Various rubber pastes. 12. Various abrasives, corrosive agents, petroleum and mud, cleaning grease and general containers. 13. Various highly toxic, flammable, and volatile liquids. 14. Various strong acids, alkalis, and corrosive liquids. 15. Various high-temperature liquids are highly resistant to 150℃. 16. As a pre-stage pressure delivery device for various solid-liquid separation equipment.

G-type single-screw pumps have been widely used in developed countries. Most foreign countries call single-screw pumps ”MONOPUMPS” and ”MONOPUMPS", and Germany calls them "eccentric rotor pumps". Its major characteristics are strong adaptability to the medium, stable flow, small pressure pulsation, and high self-priming ability. Due to the special geometry of the two components, the G-type single screw pump forms a separate sealed cavity. The medium flows evenly from the axial direction, the internal flow rate is low, the volume remains the same, and the pressure is stable, so there will be no eddy currents and agitation. The output pressure of each stage pump is 0.6MPa, the head is 60m (clear water), and the self-priming height is generally above 6m. Because the stator is made of a variety of elastic materials, this kind of pump has characteristics that are not capable of conveying high-viscosity fluids and media containing hard suspended particles or media containing fibers. Its flow rate is proportional to the speed of rotation. The single screw pump has a compact structure, small size and easy maintenance. It has strong adaptability to the medium, stable flow, low pressure pulsation, and high self-priming ability. The working temperature can reach 120℃. If you need to transport a high temperature medium of 120℃-350℃, it can be customized. It is widely used in food, metallurgy, papermaking, printing and dyeing, chemical industry, fertilizer, pharmaceutical and other industrial sectors.

Technical parameters of DG type horizontal multistage pump： Flow rate: 6.3-300m3/h； Head: 13-650m； Power: 2.2-400KW； Rotation speed: 1450-2950r/min； Caliber: φ50-φ200； Temperature range: ≤105℃； Working pressure: ≤3.0Mpa. The DG type pump is a single-suction multi-stage segmented centrifugal pump for conveying clear water and liquids with physical and chemical properties similar to clear water. The pump head is H19 to 245.7 meters, the flow rate is 18 to 162m3/h, and the high temperature of the liquid must not be 80℃. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, fire-fighting booster, long-distance water delivery, heating, bathroom and other heating and cooling water circulation booster and equipment supportingEtc., especially suitable for small boiler water supply.

UHB-FX series pumps are upgraded products of the original UHB-UF series: high mechanical strength, new type of sealing, and long service life. Features and advantages 1. The material of the overcurrent components is ultra-high molecular polyethylene； 2. Good corrosion resistance, excellent wear resistance and creep resistance； 3. Structural innovation and improvement, energy saving and high efficiency； 4. The new type of seal, the air-cooled shaft seal has changed the traditional water-cooled shaft seal, which saves water and is environmentally friendly. There is no worry of overflow of cooling water and has a longer life span.

This product series has a total of more than 20 specifications, with a wide range of flow and head. It is suitable for conveying liquids in petroleum, chemical, pharmaceutical, pesticide, pickling, dyes, paints, smelting, papermaking, electroplating, food and other industries to prevent running, risking, dripping, and leaking. It is an ideal equipment for building a modern civilized factory. Technical parameters Flow rate: 3.6～100m3/h； Head: 15～55m； Speed: 2900r/min； Power: 1.5～18.5KW； Inlet diameter: 25～100mm； Applicable temperature: -20℃～120℃.

Water supply: secondary water supply for high-rise buildings, filtration, transportation, and pressurization of water plants Industrial pressurization: cleaning system, process water system, high pressure flushing system, fire protection system Industrial liquid transportation: boiler water supply, condensing west Wing, machine tool components Supporting HVAC: Air conditioning system Irrigation: farmland irrigation, sprinkler irrigation, drip irrigation Water treatment: swimming pool, distillation system, etc.

Scope of application of stainless steel self-priming sewage pump It is suitable for chemical, petroleum, pharmaceutical, mining, papermaking, fiber, slurry, textile, food, power plant and municipal sewage projects, public facilities sewage, river and pond aquaculture and other industries. 1. The ambient temperature is≦50℃, and the medium temperature is≦80℃. Special requirements can reach 200. ℃ 2. The pH value of the medium is 6-9 for cast iron and 2-13 for stainless steel. 3. The weight of the medium does not exceed 1240 kg/m3 4. The self-priming height cannot exceed the specified value of 4.5-5.5 meters, and the length of the suction tube is≦10 meters. 5. The diameter of the suspended particles through the capacity is 60% of the diameter of the pump, and the fiber length is 5 times the diameter of the pump. Stainless steel self-priming sewage pump product advantages 1. Strong sewage discharge capacity: the special impeller anti-clogging design ensures that the pump is efficient and non-clogging. 2. High efficiency and energy saving: Using an excellent hydraulic model, the efficiency is 3 to 5% higher than that of ordinary self-priming pumps. 3. Good self-priming performance: the height of self-priming is 1 meter higher than that of ordinary self-priming pumps, and the self-priming time is shorter. Technical parameters of stainless steel self-priming sewage pump Flow rate: 5-800m3/h； Head: 12-60m； Motor power: 2.2-132KW； Speed: 1450-2900r/min； Caliber: φ25-φ300； Medium temperature: ≤100℃； Self-priming height: 4.5-6.0m.